Passage Plan Report - Furuno FEA-2107 Operator's Manual

13. Route Planning
13.9

Passage Plan Report

Passage Plan report generates WP report together with pilot data report. The system automatically attaches pilot data
from the planning mode on the route plan when you choose the Passage Plan report. To display the report viewer,
choose Route-Plan from the status bar, place the cursor on the triangle in the Plan Route dialog box, choose Passage
Plan Report from the menu and then push the thumbwheel. To close the report, click X in the right corner of the
report viewer. The report may be printed by clicking the Print Text button.
The example below shows that a passage plan has been generated using the route plan "SOUTHAMPTON
ROTTERDAM" and pilot data generated for "SOUTHAMPTOROTTERDAM".
An example of WP report
An example of pilot data report
An example of passage plan report. Pilot data text notes are placed between waypoints based on their position (in
which leg defined Pilot data will be activated)
13-18