9. Raster Chart Material
Adding ARCS charts to a group
After you have entered a name for the group, click the Add Frame button in the Group field. Choose the area to
group by moving the cursor to the desired location and clicking the left mouse button. Below is a sample group.
Charts that are inside the frame or intersect a frame limit are added to the group. When your frame is ready, click the
Done button in the Group field. Chart cells which are chosen into defined group are displayed in the Inside list box
in the Group window.
You can also add charts to your group by using the << (add) button. To add a chart, choose the chart ID from the
Outside list box and then click the << button.
Note: Check the Permit box to have the system display only the chart cells for which you have permits.
After you have selected some charts to group, click the Save button to save the chosen charts as a group.
9-28