Calling Menus And Functions By The Mouse Buttons - Furuno FEA-2107 Operator's Manual

4. Control Units
4.4.4

Calling menus and functions by the mouse buttons

The mouse buttons can be used to call menus or functions on the display. At the lower right corner of the display the
mouse functions area displays available function or menu name, as shown in the figure below. Spin the thumbwheel
to choose menu or function desired, and then push the left button, thumbwheel or right button as appropriate to
access the menu or function desired. Available menus and functions depend on cursor location. (For more
information, see paragraph 3.3 "User Interface".)
Left Button
F1
F2
F3
F4
LEFT BUTTON THUMBWHEEL
Menu Info
Range- Info
TM Reset Info
Event Info
Set Chart Center Info
Show Value Info
Chart Display Info
Using the functions shown in the figure above as an example, the available functions with the mouse are as follows:
•
"Menu" by pushing left button
•
"Info" by pushing thumbwheel
•
"Chart Menu" by pushing right button
4-10
Right Button
Thumbwheel
RIGHT BUTTON
Chart Menu
Range+
ShipOffcenter
MOB
Activate Scroll
Nav Marks
Standard Display
Mouse functions area