Notices; Industry Standards Reflected In This Product - IBM 8265 Site Preparation Manual

Notices

Industry Standards Reflected in This Product

© Copyright IBM Corp. 1994, 1998
References in this publication to IBM products, programs or services do not imply that
IBM intends to make these available in all countries in which IBM operates. Any
reference to an IBM product, program, or service is not intended to state or imply that
only IBM's product, program, or service may be used. Any functionally equivalent
product, program, or service that does not infringe any of IBM's intellectual property
rights may be used instead of the IBM product, program, or service. Evaluation and
verification of operation in conjunction with other products is the user's responsibility.
IBM may have patents or pending patent applications covering subject matter in this
document. The furnishing of this document does not give you any license to these
patents. You can send license inquiries in writing to the IBM Director of Licensing,
IBM Corporation, 500 Colombus Avenue, Thornwood, New York 10594, U.S.A.
The IBM 8265 Nways ATM Switch is designed according to the specifications of the
following industry standards as understood and interpreted by IBM as of October
1992.
International Organization for Standardization (ISO)
•
ISO 8802/1
•
ISO 8802/3
•
ISO 8802/5
IEEE (Institute of Electrical and Electronic Engineers)
•
802.1 Local area network (LAN) management and Internet working
•
802.3 Carrier sense multiple access and collision detection
•
802.5 Token passing ring
ITU-T (International Telecommunication Union - Telecommunication)
The IBM standards for the implementation of ATM are:
•
Q.2110 Service Specific Connection-Oriented Protocol (SSCOP)
•
Q.2130 Service Specific Coordination Function (SSCF)
ATM Forum
ATM Forum has defined the ATM User-Network Interface (UNI) Specification V3.0
and 3.1.
137