Measure/Beat Parameter; Mark/Jump Function - Yamaha QS300 Owner's Manual

To use the Measure/Beat parameter for location: ............
Highlight the measure number (in the main Song Play
display shown above), and use the following controls:
D/I buttons — to step through the measures.
•
• Rotary dial — to quickly move through the mea-
sures.
Numeric keypad (then E) — to directly go to
•
a specific measure number.
The mark/jump function lets you "mark" (memorize) up to
10 locations within the current song and "jump" to any one
of the marked locations in one easy step.
To mark a location: ...............................................................
1. Press # (Mark) from the main Song Play display.
This calls up the Mark/Jump display.
Measure/Beat of
Mark/Jump number 1.
2.
From the above display, move the highlight to an
empty number (for example, "2" above) and press
E.
This records the current measure/beat location to the
specified Mark/Jump number, and returns you to the
Song mode.
68

Measure/Beat Parameter

Measure number

Mark/Jump Function

Currently selected
Mark/Jump number.
Beat number
The beat number always resets to 1 when locating a new
measure.
To jump to a marked location: ............................................
1. Press # (Mark).
2.
Move the highlight to the appropriate Mark/Jump
number (or enter the number via the numeric
keypad), and press E.
The display immediately returns to Song Play at the
specified location.
To clear a marked location: .................................................
Press # (Mark).
1.
2.
Move the highlight to the desired Mark/Jump
number (or enter the number via the numeric
keypad), and press ! (Clear).