Accessing The Web Interface - 3Com SuperStack II Manual

44 C 3: W
HAPTER ORKING
Accessing the Web
Interface
W W I
ITH THE EB NTERFACE
You can access the web interface through the console port or over the
network.
To access the web interface through the console port, you must install,
configure and run the Serial Web Utility described in
on page 227. Note that the Serial Web Utility is only required if you want
to access the web interface through the console port; it is not required for
access over the network.
To access the web interface over the network, take the following steps:
1 Ensure that your network is correctly set up for management using the
web interface. For more information, see
Management" on
2 Open your Web browser.
3 In the Location field of the browser, enter the URL of the stack. This must
be in the format:
http:// nnn.nnn.nnn.nnn/
where
nnn.nnn.nnn.nnn
When the browser has located the stack, a user name and password
dialog is displayed as shown in
Figure 2 User name and password dialog
If the user name and password dialog is not displayed, see
Interface Problems"
page 33.
is the IP address of the stack.
Figure 2.
on page 214.
"Serial Web Utility"
"Setting Up Web Interface
"Solving Web