Packet Size Analysis; Displaying Port Summary Information - 3Com SuperStack II Manual

126 C 4: W
HAPTER ORKING
Displaying Port
Summary
Information
W C L
ITH THE OMMAND INE

Packet Size Analysis

Displays the number of packets seen by the port that had a length which
was in one of six ranges between 64 and 1518 octets. This information
may help you to analyze the efficiency of your network layer protocol.
You can display summary information about Ethernet ports on the Switch
using the
summary
To display the port summary information:
1 At the Top-level menu, enter:
ethernet summary
The following prompt is displayed:
Select Ethernet port (1-24,all):
2 Enter the number of a port, or enter
The port summary information for the port(s) is displayed.
An example of the port summary information is shown below:
Port State
1 Enabled
2 Disabled
3 Enabled
...
24 Enabled
The statistics that are displayed are gathered in the time interval since the
last reset, initialization or power-off/on cycle.
I
NTERFACE
command on the Ethernet menu.
all
Rx Packets
163542
0
639263
645232
for all the ports.
Rx Octets Errors
65439864 4
0 0
83636219 4
23142514 0