Displaying User Details; Modifying User Details - 3Com SuperStack II Manual

148 C 4: W
HAPTER ORKING
Displaying User
Details
Modifying User
Details
W C L
ITH THE OMMAND INE
Enter the access level (monitor,manager,security)
[security]:
3 Enter an access level for the new user.
The following prompt is displayed:
Enter the password:
4 Enter a password for the new user.
The following prompt is displayed:
Re-enter the password:
5 Enter the password for the new user again.
The following prompt is displayed:
Enter the community string [<user>]:
6 Enter a community string for the new user.
You can display the user details for the stack using the
command on the System/Security/User menu.
To display the user details for the stack:
From the Top-level menu, enter:
system security user display
The user details are displayed.
An example of the details is shown below:
Name
admin
manager
monitor
security
You can modify user details for the stack using the
the System/Security/User menu.
To modify user details for the stack:
1 From the Top-level menu, enter:
system security user modify
The following prompt is displayed:
Enter the user name:
I
NTERFACE
Access Level
security
manager
monitor
security
display
Community String
admin
manager
monitor
security
command on
modify