Displaying Trap Destination Details; Modifying Trap Destination Details - 3Com SuperStack II Manual

138 C 4: W
HAPTER ORKING
Displaying Trap
Destination Details
Modifying Trap
Destination Details
W C L
ITH THE OMMAND INE
2 Enter the community string of the trap destination device.
The following prompt is displayed:
Enter the trap destination address:
3 Enter the IP address of the trap destination device.
You can display the community string and IP address of the current trap
destination devices using the
menu.
To display trap destination details:
At the Top-level menu, enter:
snmp trap display
The trap destination details are displayed.
An example of the information is shown below:
Index Community String
1 monitor
2 monitor
3 monitor
4 monitor
You can modify the community string and IP address of a current trap
destination device using the
To modify trap destination details:
1 At the Top-level menu, enter:
snmp trap modify
The following prompt is displayed:
Select trap index (1,2,3):
2 Enter the index number of the trap destination device to be modified.
The following prompt is displayed:
Enter the trap community string [monitor]:
3 Enter the new community string of the trap destination device.
The following prompt is displayed:
Enter the trap destination address [<ip address>]:
4 Enter the new IP address of the trap destination device.
I
NTERFACE
command on the SNMP/Trap
display
Destination Address
191.1.1.1
191.1.1.2
191.1.1.3
191.1.1.4
command on the SNMP/Trap menu.
modify