About This Guide; Conventions - 3Com SuperStack II Manual

Conventions

A T
BOUT HIS
This guide provides all the information you need to manage units in the
®
SuperStack II Switch 1100/3300 and 610/630 family with management
software version 2.50.
The guide is intended for use by network administrators who are
responsible for installing and setting up network equipment;
consequently, it assumes a basic working knowledge of LANs (Local Area
Networks).
Throughout this guide, the term stack refers to a number of Switch units
that are managed as a single unit. However, a stack can contain a single
Switch. In the case of the 610/630 family, stackability is not supported.
If the information in the release notes that are shipped with your product
differs from the information in this guide, follow the instructions in the
release notes.
Table 1 and Table 2 list conventions that are used throughout this guide.
Table 1 Notice Icons
Icon Notice Type
Information note
Caution
Warning
G
UIDE
Description
Information that describes important features or
instructions
Information that alerts you to potential loss of data or
potential damage to an application, system, or device
Information that alerts you to potential personal injury