3Com SUPERSTACK II User Manual
Switch matrix module
Hide thumbs
Also See for SUPERSTACK II:
- Manual (248 pages) ,
- User manual (92 pages) ,
- Using manual (212 pages)
Related Manuals for 3Com SUPERSTACK II
Summary of Contents for 3Com SUPERSTACK II
- Page 1 sales@artisantg.com artisantg.com (217) 352-9330 | Visit our website - Click HERE...
-
Page 2: Before Installation
II Switch Matrix Module (3C16960) AVERTISSEMENT: Confiez l'installation et la dépose de ce installed into your SuperStack II Switch, you can connect up module à un personnel qualifié. Avant d'installer ce module to four Switches over high speed links, in a single stack. This dans un groupe, vous devez au préalable débrancher ce... -
Page 3: Installing The Module
Cabling Installing the Module With the Matrix Module installed, you can connect up to We recommend that you install the Matrix Module into the four Switches in a stack. A typical configuration is shown in unit that will be at the bottom of your stack. Figure 2. -
Page 4: Emc Statements
1 Ensure that your Switches are correctly installed and that EMC Statements you have the correct number of Matrix Cables for your con- figuration. We recommend that the bottom unit in your FCC Statement: This equipment has been tested and stack is the one that contains the Matrix Module. -
Page 5: Limited Warranty
Customer, at the expense of 3Com, not later than thirty (30) days after receipt of Limited Warranty 3Com Corporation the defective product by 3Com. Warranties Exclusive: IF A 3COM PRODUCT DOES NOT OPERATE AS WAR- Hardware: 3Com warrants its hardware products to be free from defects in RANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR BREACH OF THAT WARRANTY...
Need help?
Do you have a question about the SUPERSTACK II and is the answer not in the manual?
Questions and answers