3Com SuperStack II Manual page 175

Figure 35 Simple example: 802.1Q tagged connections
To set up the configuration shown in
1 Configure the VLANs on Switch 1
Use the VLAN Setup page of the web interface to define VLAN 2. VLAN 1
is the default VLAN and already exists. Do not add the ports to the VLAN
using this screen. For more information about creating a VLAN, see
"Configuring VLANs"
2 Add untagged ports on Switch 1
Use the Untagged VLAN listbox on the Port Setup page of the web
interface to place untagged ports in the appropriate VLAN
For more information about editing the port setup, see
Port" on page 59.
VLAN Configuration for Beginners
Figure
on page 83
35:
"Configuring a
175