Port Trunk Example - 3Com SuperStack II Manual

160 C 5: P
HAPTER ORT

Port Trunk Example

T
RUNKS
The example shown in
between two Switch units.
Figure 31 An 800Mbps port trunk between two Switch units
To set up this configuration:
1 Prepare ports 13, 15, 17 and 19 on the higher Switch for port trunking:
a Use the web interface to ensure that the ports have an identical
configuration:
b Use the Port Trunk Setup page of the web interface to specify that
ports 13, 15, 17 and 19 are ports of the port trunk.
Figure 31 illustrates an 800Mbps port trunk