3Com SuperStack II Manual page 90

90 C 3: W
HAPTER ORKING
W W I
ITH THE EB NTERFACE
To upgrade the management software:
1 Copy the software upgrade file into an appropriate directory on a TFTP
server. For information on using a TFTP Server, see the documentation
that accompanies it.
CAUTION: You must ensure that the port connected to the TFTP server
has 802.1Q VLAN learning disabled and belongs to the Default VLAN
(VLAN 1). The server can only upgrade a stack if it is connected to the
stack by the Default VLAN.
You can download a TFTP server called 3CServer (filename: 3cs117.zip)
from 3Com's website
and run on a Microsoft Windows® 95/98 or NT system.
2 Enter the name of the software upgrade file in the Filename field. The
filename format is:
s2sxx_yy.bin
where is the version of management software.
xx_yy
CAUTION: You must use the
upgrade fails.
3 Enter the IP address of the TFTP server in the Server Address field.
4 Click the Apply button. During the upgrade, the Power/Self Test LED
flashes green and the command line interface is locked. The units in the
stack upgrade one at a time, and each unit takes about 5 minutes; when
the upgrade is complete, the Switch units in the stack are reset.
CAUTION: During the upgrade, do not power-down or reset any Switch
units in the stack.
http://www.3com.com
s2sxx_yy.bin
. 3CServer can be installed
format, otherwise the