Removing A Port From A Vlan; Displaying Summary Vlan Information - 3Com SuperStack II Manual

Removing a Port from
a VLAN
Displaying Summary
VLAN Information
You can remove a single port from a VLAN, or remove all ports on the
current Switch unit from the selected VLAN using the
command on the VLAN menu.
To remove a port from a VLAN:
1 At the Top-level menu, enter:
bridge vlan removePort
The following prompt is displayed:
Select VLAN ID (1-4094) [1]:
2 Enter the number of the VLAN ID that you wish to remove a port from.
The following prompt is displayed:
Select port (1,5,7,all):
3 Enter the port number to be removed from the VLAN, or enter
ports on the current Switch unit to be removed. The choice of port
numbers reflects the number of ports on the current Switch unit. An error
message is displayed if there are no ports within the selected VLAN.
You can display summary information about a single VLAN or all VLANs
present in the stack, specifically port membership, using the
command on the VLAN menu.
To display summary VLAN information:
1 At the Top-level menu, enter:
bridge vlan summary
The following prompt is displayed:
Select VLAN ID (1-4094, all) [1]:
2 Enter the VLAN ID that you wish to display, or enter
VLANs in the current stack.
The summary VLAN information for the selected VLAN ID is displayed as
shown in the example below.
VLAN ID Local ID
1 1
Select menu option:
Displaying and Changing Bridging/VLANs Information
Name
Default VLAN
119
removePort
for all
all
summary
to display all
all