Displaying Detailed Trunk Information; Removing A Port From A Trunk - 3Com SuperStack II Manual

132 C 4: W
HAPTER ORKING
Displaying Detailed
Trunk Information
Removing a Port from
a Trunk
W C L
ITH THE OMMAND INE
3 Enter the port number that you wish to add to the trunk. (The choice of
port numbers reflects suitable candidate ports.)
You can not add a port to a trunk that is already a member of a trunk, is
part of a resilient link, is in VLT mode, or is selected as the copy port or
study port.
You can display detailed trunk information for a single trunk within the
current Switch unit using the
To display detailed trunk information:
1 At the Top-level menu, enter:
feature trunk detail
The following prompt is displayed:
Select Trunk Index (1-2):
2 Enter the index number of the trunk for which you wish to see detailed
information.
3 The detailed trunk information is displayed as shown in the example
below.
Unit 2 Trunk 1
Unit 2 Port 2
Unit 2 Port 3
Unit 2 Port 4
Unit 2 Port 5
Select menu option:
You can remove a single port from a trunk using the
command on the Trunk menu.
To remove a port from a trunk:
1 At the Top-level menu, enter:
feature trunk removePort
The following prompt is displayed:
Select trunk index (1-2):
2 Enter the index number of the trunk that you wish to remove a port from.
I
NTERFACE
command on the Trunk menu.
detail
Port Mode
100 Half
100 Half
100 Half
100 Half
Status
Inactive
Inactive
Inactive
Inactive
removePort