3Com SuperStack II Manual page 106

106 C 4: W
HAPTER ORKING
W C L
ITH THE OMMAND INE
To display the statistical information:
1 At the Top-level menu, enter:
bridge display
2 The bridge information for the Switch is displayed as shown in the
following example.
stpState:
Time since topology change:
Topology Changes:
Bridge Identifier:
Designated Root:
maxAge:
helloTime:
forwardDelay:
holdTime:
rootPort:
Select menu option:
The following bridge information is displayed:
— Displays the configurable parameter that provides the
StpState
state of the bridge (that is, whether Spanning Tree is enabled or
disabled).
Time Since Last Topology Change
hours, minutes, and seconds) since STP last reconfigured the network
topology.
Topology Changes
reconfigured the network topology.
Bridge Identifier
the bridge priority value and the MAC address of the lowest
numbered port.
— Displays the time-out period in seconds for aging out
agingTime
dynamically learned forwarding information.
Designated Root
the root bridge's priority value and the MAC address of the lowest
numbered port on that bridge.
bridgeMaxAge
bridge is the root bridge. This value determines when the stored
configuration message information is too old and is discarded.
I
NTERFACE
disabled agingTime:
0 hrs 0 mins 0 seconds
0
8000 08004e56d778
0001 000000020000
0 bridgeMaxAge:
1 bridgeHelloTime:
105 bridgeFwdDelay:
1 rootCost:
No Port priority:
— Displays the number of times that STP has
— Displays the bridge identification. It includes
— Displays the root bridge identification. It includes
— Displays the maximum age value, used when this
1800
20
2
15
131072
0x8000
— Displays the time elapsed (in