Downloading Nvram Data - Ricoh M001 Service Manual

NVRAM Data Upload/Download

5.5.2 DOWNLOADING NVRAM DATA

Follow this procedure to download the data from the SD card to the NVRAM, after the
NVRAM has been replaced.
If the NVRAM data file cannot be downloaded successfully, the settings must be
restored manually using the SMC report that was printed before NVRAM
uploading.
1. Confirm that the main power switch is off.
2. Confirm that you have the SD card that contains the proper NVRAM data for the
machine.
3. Remove the SD card slot cover.
4. Insert the SD card into Slot 2.
5. Turn on the main power switch.
6. Enter the SP mode and do SP5825 (NVRAM Download).
7. Push [#Enter].
<NVRAM Download>
execute?
M001 5-92 SM