Move Exec - Ricoh M001 Service Manual

5.6.2 MOVE EXEC

"Move Exec" (SP5873 1) moves application programs from the original SD card to another
SD card. The application programs are moved from Slot 2 to Slot 1.
1. Turn off the main power switch.
2. Remove the SD card slot cover.
3. Insert the original SD card with the application in Slot 2.
4. Insert the SD card to receive the application in Slot 1.
5. Turn on the main power switch.
6. Enter the SP mode and do SP5873 1 "Move Exec."
7. Follow the messages on the operation panel to complete the procedure.
8. Exit the SP mode.
9. Turn off the main power switch.
10. Remove the original SD card from Slot 2.
11. Leave the other SD card in Slot 1.
12. Turn on the main power switch.
13. Confirm that the application program runs normally.
14. Tell the customer to store the original SD card in a safe place.
SM
SD Card Application Move
5-95 M001