Procedure - Ricoh M001 Service Manual

Card Save Function

5.10.2 PROCEDURE

1. Turn the main power switch OFF.
2. Insert the SD card into the service slot (lower) of the controller board. Then turn the
power ON.
To determine which slot is the service slot, please see the service manual.
3. Enter SP mode.
4. Select "Service" and press "#Enter" button twice.
5. Select "Bit Switch 1"and press "#Enter" button.
6. Use the arrow key to turn "Bit Switch 4" and press "Enter" and use the arrow key to turn
bit 4 ON. The result should look like: 00010000. By doing this Card Save option will
appear in "List/Test Print".
M001 5-106 SM