Ricoh M001 Service Manual page 89

Rev. 11/10/2009
817 Monitor error
This is a file detection and electronic
file signature check error when the
boot loader attempts to read the
D
self-diagnostic module, system
kernel, or root system files from the
OS Flash ROM, or the items on the
SD card in the controller slot are false
or corrupted.
Fatal kernel error
Due to a control error, a RAM
overflow occurred during system
processing. One of the following
messages was displayed on the
operation panel.
819 C
0x696e
0x766d
4361
Other
For more details about this SC code error, execute SP5990 to print an SMC report so you
can read the error code. The error code is not displayed on the operation panel.
Self-Diagnostic Error: CPU
820 D
The central processing unit returned an error
during the self-diagnostic test.
SM
OS Flash ROM data defective;
change the controller firmware
SD card data defective; use
another SD card
System program defective
Controller board defective
Optional board defective
Replace controller firmware
init died
vm_pageout: VM is full
Cache Error
4-9
Service Call Conditions
Controller board
defective
Software defective
M001