Ricoh M001 Service Manual page 161

Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
004
[0000 to 9999/1] (DFU)
Enter as a decimal number. NCS converts the number to hexadecimal
number recognized as the BCD.
Delivery Srv
5845
Provides items for delivery server settings.
5845 003 Retry Interval
5845 004 No. of Retries
5845 022 InstantTrans Off
Switches instant transmission off/on.
[0 to 1/1/1]
0: Off. Instant transmission not possible with network setting errors.
1: On. Instant transmission possible with network setting errors.
Note:
The machine will continue to transmit over the network, even if the
network settings are incorrect. (This causes multiple errors, of course.)
With this SP off, the machine will stop communicating with the network
if the settings are wrong. This reduces the amount of spurious network
traffic caused by errors due to incorrect settings.
SM
Determines the time interval between retries before
the machine returns to standby after an error occurs
during an image transfer with the delivery scanner
or SMTP server.
[60 to 900/300/1]
Determines the number of retries before the
machine returns to standby after an error occurs
during an image transfer with the delivery or SMTP
server.
[0 to 99/3/1]
5-43
Printer Engine Service Mode
M001