Energy Saver Mode - Ricoh M001 Service Manual

Image Fusing and Paper Exit

6.5.8 ENERGY SAVER MODE

When the machine is not being used, the energy saver feature reduces power consumption
by switching off the fusing lamp.
Entering Energy Saver Mode
Energy saver mode starts after the machine has been idle for a specified time. The
operator can set the time on the System menu. ([Menu] > "System"]. Several settings are
available: Off, 1, 5, 15, 30, 45, 60 min (Default: 5 min.)
When the machine is in energy saver mode, the CPU turns off the fusing lamp. The +5VE
(power enabled in energy saver mode) line is active in energy saver mode; however, the
+24V and +5V lines are not active.
Leaving Energy Saver Mode
The machine leaves energy saver mode when one of the following events occur:
Print command received from the PC
Any cover opened and closed
Any operation panel keys pressed
M001 6-36 SM