Ricoh M001 Service Manual page 167

Erase SD Log
Erases all debug logs on the SD Card. If the card contains only debugging
5857 012
files generated by an event specified by SP5858, the files are erased when
SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
FreeSpaceonSD
5857 013
Displays the amount of space available on the SD card.
SD to SD (4MB)
5857 014
Copies the last 4MB of the log (written directly to the card from shared
memory) onto an SD card.
SD to SD (Any)
5857 015
This SP copies the log on an SD card (the file that contains the information
written directly from shared memory) to a log specified by key number.
Make SD LogFile
5857 017
This SP creates a 4 MB file to store a log on an SD card.
Debug Save When
5858
These SPs select the content of the debugging information to be saved to
the destination. Refer to Section 4 for a list of SC error codes.
5858 001 EngineSC Error
5858 002 SystemSC Error
5858 003 Any SC Error
5858 004 Jam
SM
Printer Engine Service Mode
Stores SC codes generated by copier engine
errors.
Stores SC codes generated by GW controller
errors.
[0 to 65535/0/1]
Stores jam errors.
5-49 M001