Fusing Drive; Fusing Entrance And Guide Shaft - Ricoh M001 Service Manual

Image Fusing and Paper Exit

6.5.2 FUSING DRIVE

The main motor [A] drives the fusing unit through a gear train.

6.5.3 FUSING ENTRANCE AND GUIDE SHAFT

The entrance guide [A] is adjustable for paper thickness to prevent creasing.
If creasing occurs frequently in the fusing unit, remove all screws ( ) and slide the
entrance guide to the right. Replace the two end screws only. Do not replace the middle
screw. This procedure allows paper to have more direct access to the gap between the hot
roller and the pressure roller.
M001 6-30 SM