Downloading Nvram Data; Sd Card Appli Move [G113/G116]; Overview - Ricoh G112 Service Manual

Rev. 09/2005

Downloading NVRAM Data

Copy the data from the SD card to the NVRAM (referred to as "to download
NVRAM data" in this section) after you replace the NVRAM. If you cannot
download NVRAM data, manually input the necessary settings.
1. Make sure that the main power switch is OFF.
2. Make sure that you have the correct SD card that contains the
necessary NVRAM data.
3. Insert the SD card into the upper slot [A] (slot 1).
4. Turn ON the main power switch.
5. Start the SP mode.
6. Select SP 5825 1 (NVRAM Download).
7. Push the enter key. The download starts.
NOTE: The machine cannot do the download if the file name in
the SD card is different from the serial number of the
printer ( Uploading NVRAM Data).
8. Go out of the SP mode.
9. Turn OFF the main power switch.
10. Remove the SD card.
11. Turn ON the main power switch.
12. Check that the NVRAM data is correctly downloaded.
⇒

5.12 SD CARD APPLI MOVE [G113/G116]

5.12.1 OVERVIEW

The service program "SD Card Appli Move" (SP 5873) lets you copy application
programs from an SD card to another SD card.
Use extreme caution when do the SD Card Appli Move procedure:
1. The authentication data is transferred with the application program from an SD
card to the other SD card. Authentication fails if you try to use the SD card after
you copy the application program from this card to another SD card.
2. Do not use an SD card if it has been used for some other work, for example, on
a computer. Normal operation is not guaranteed when such SD card is used.
3. Keep the SD card in the place ( Note) after you copy the application program
from the card to another card. This is because:
proof that the user is licensed to use the application program.
to check the SD card and its data to solve a problem in the future.
SM
SD CARD APPLI MOVE [G113/G116]
The SD card can be the only
5-37 G112/G113/G116/G094/G095/G091
[A]
G116S511.WMF
You may need