Rev. 11/03/2009
4.3 GENERAL TROUBLESHOOTING
4.3.1 IMAGE ADJUSTMENT
Registration Adjustment
The registration is adjusted in the user mode ("Maintenance-Registration"). For details, see
the Printer Reference operation manual.
Parallelogram Image Adjustment
Do the following procedure if a parallelogram is printed while adjusting the printing
registration using a trimming pattern.
Use the scanner positioning pin (P/N: A0069104) for this adjustment.
1.
Remove the upper cover (See "Upper Cover")
2.
Put a positioning pin in one of the holes
3.
Loosen four screws and move the laser unit.
4.
Tighten the laser unit.
5.
Print the trimming area pattern to check the image. If it is still the same, repeat steps 3
to 5.
SM
General Troubleshooting
4-29
M001