Ricoh M001 Service Manual page 156

Printer Engine Service Mode
5828 050 1284 Compatible
5828 052 ECP
5828 065 Job Spool
5828 066 HD job Clear
5828 069 JobSpool Protocl
This SP determines whether job spooling is enabled or disabled for each
protocol. This is a 8-bit setting.
0: LPR/ 1: FTP (Not Used)/ 2: IPP/ 3: SMB/ 4: BMLinks (Japan Only)/
5: DIPRINT/ 6: Reserved (Not Used)/ 7: Reserved (Not Used)
5828 090 TELNET
M001
Enables and disables bi-directional communication on
the parallel connection between the machine and a
computer.
[0to1/1]
0:Off, 1: On
Disables and enables the ECP feature (1284 Mode) for
data transfer.
[0to1/1]
0: Disabled
1: Enabled
Switches job spooling spooling on and off.
0: No spooling, 1: Spooling enabled
This SP determines whether the job interrupted at
power off is resumed at the next power on. This SP
operates only when SP5828 065 is set to 1.
1: OFF (Resumes printing spooled jog.)
0: ON (Clears spooled job.)
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
[0to1/1]
0: Disable
1: Enable
5-38 SM