Ricoh M001 Service Manual page 108

Error Messages
1st/2nd Message
SD authentication failed
1st/2nd Message
SD card not set, Contact admin.
SSID not entered
Supply order
failed.
Update Mode Err, Power Off On
M001
Problem/Solution
Or, change the paper size using tray dial or
operation panel.
Or, push [Form Feed] to print on current paper.
Or, cancel job.
Authentication from the SD card failed.
Turn the machine off/on.
Problem/Solution
The SD card for DOS is not set.
This message confirms that no ID has been entered.
Enter correct ID
Call for supply order has failed.
Confirm the setting of @Remote.
The printer has failed to restart the update.
Turn the machine off/on.
4-28
Rev. 11/03/2009
SM