Error Messages - Ricoh M001 Service Manual

Error Messages

998 Application start error
No applications start within 60
seconds after the power is turned
⇒
on.
4.2 ERROR MESSAGES
Here is a list of common error messages, a description of the problems, and their solutions.
This is just a reference information.
1st/2nd Message
Cannot check, Signal in Ad hoc
Cannot duplex Tray #/ Press
Form Feed or reset the Job
Cannot install from this SD card
Certificate auto renewal failed
Change Setting
Tray #/Paper Size:, Paper Type:
M001
• Loose connection of RAM-DIMM,
ROM-DIMM
• Defective controller
• Software problem
1. Check if the RAM-DIMM and
ROM-DIMM are correctly connected.
2. Reinstall the controller system
firmware.
3. Replace the controller.
Problem/Solution
Disable Ad hoc in the Comm. Mode settings.
Duplexing prohibited from specified tray.
Cancel duplex mode
Press [Form Feed] or [Job Reset].
SD card contains a DOS (Data Overwrite Security)
program that has already been installed for another
machine.
Contact system administrator.
Automatic certificate renewal has failed.
Call your service provider.
The paper size/paper type settings in the application
program and printer driver do not match.
4-22
Rev. 11/03/2009
SM