Ricoh M001 Service Manual page 148

Printer Engine Service Mode
This name is customer information and is not printed in the SMC report.
Cert: Up State
Displays the status of the certification update.
0 The certification used by embedded RCG is set correctly.
The certification request (setAuthKey) for update has been received
1
from the GW URL and certification is presently being updated.
The certification update is completed and the GW URL is being
2
notified of the successful update.
The certification update failed, and the GW URL is being notified of the
3
failed update.
The period of the certification has expired and new request for an
4
update is being sent to the GW URL.
5816 067
A rescue update for certification has been issued and a rescue
11
certification setting is in progress for the rescue GW connection.
The rescue certification setting is completed and the GW URL is being
12
notified of the certification update request.
The notification of the request for certification update has completed
13 successfully, and the system is waiting for the certification update
request from the rescue GW URL.
The notification of the certification request has been received from the
14
rescue GW controller, and the certification is being stored.
The certification has been stored, and the GW URL is being notified of
15
the successful completion of this event.
The storing of the certification has failed, and the GW URL is being
16
notified of the failure of this event.
M001 5-30 SM