Ricoh M001 Service Manual page 107

Rev. 11/03/2009
1st/2nd Message
Remove Misfeed Paper Tray/ Pull
out Tray
Remove Paper Standard Tray
Replace Maintenance Kit
Replace Print Cartridge
Replace Print Cartridge
Replace Print Cartridge
Replace Print Cartridge soon
Reset Fusing Unit correctly
Reset Print Cartridge
Reset Tray # or Form Feed
Reset the Job or Form Feed/
Paper Size:, Paper Type:
SM
Problem/Solution
Paper is jammed in the specified input paper tray.
Remove paper from the input paper tray.
Reload paper.
Open and close front cover to extinguish
message.
The standard output tray is full.
Remove paper from output tray.
It is time to replace: feed roller, transfer unit, fusing
unit, development unit.
Print cartridge requires replacement.
Print cartridge requires replacement (out of toner).
Print cartridge requires replacement (used toner tank
full).
The print cartridge is out of toner or has reached the
end of its service life. Print cartridge requires
replacement.
Fusing unit not set correctly, or incorrect type
installed.
Check the type of fusing unit installed.
Confirm that unit is installed correctly.
AIO unit not installed or is not installed correctly.
Insert AIO.
Check that it is inserted properly.
Specified paper input tray is not set correctly. (Current
resident printer languages only).
Set input tray correctly.
Actual paper type and size do not match the paper
tray size and type setting.
Load the indicated tray with the correct paper.
4-27
Error Messages
M001