Ricoh M001 Service Manual page 155

NVRAMUpload
Uploads the UP and SP mode data (except for counters and the serial
5824
number) from NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents
a software module accessing the NVRAM during the upload.
NVRAMDownload
5825
Downloads the content of a flash memory card to the NVRAM on the control
board.
Network
This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the
5828
next generation protocol designed by the IETF to replace IPV4. IPv6 adds
many improvements such as routing and network auto-configuration.
5828 022 ActIPv4 SbNet
5828 023 ActIPv4Gatew
5828 045 Bi Direct Centro
SM
This SP allows you to confirm the IPv4 subnet mask
setting that was used when the machine started up
with DHCP. For example, if the setting for the IPv4
subnet mask is "FFFFFF00H" this is displayed as
"255.255.255.000"
This SP allows you to confirm the IPv4 default gateway
setting that was used when the machine started up
with DHCP. For example, if the setting for the IPv4
gateway is "0C0A80001h" this is displayed as
"192.168.000.001".
Enables and disables the Centro communication.
[0to1/1]
0:Off, 1: On
5-37
Printer Engine Service Mode
M001