Ricoh M001 Service Manual page 127

Side to Side Reg
Adjusts the printing side-to-side registration from the 1st paper feed station
1002
using the trimming area pattern (SP2-902 No.12).
Push [ ] or [
Specification: 0 ±2.0 mm.
1002 001 1st Tray
1002 002 2nd Tray
1002 003 3rd Tray
1002 004 Bypass Tray
1002 005 Duplex
Regist sag
Adjusts the relay clutch timing at registration. Relay clutch timing
1003
determines the amount of paper buckle at registration. (A "+" setting causes
more buckling.)
1003 001 Cassette
1003 002 Multi Tray
1003 003 Duplex Tray
Fusing control
Use phase control if the room lights flicker when the fusing lamp starts.
1104
Off: Normal
On: Phase Control
Defaults: NA Off (Normal), EU On (Phase Control)
SM
Side-to-Side Registration
] to select the settings (plus or minus).
[-40 to +40/0/1]
Registration Buckle Adjustment
[–8 mm to+8 mm/0/2 mm step]
[–8 mm to+8 mm/0/2 mm step]
[–8 mm to+8 mm/0/2 mm step]
Normal, Phase control
5-9
Printer Engine Service Mode
M001