Adf Performance Test (Function Code 08) - Brother DCP375CW Service Manual

9.4.3

ADF Performance Test (Function code 08)

Function
The machine counts the documents fed by the automatic document feeder (ADF) and displays
the count on the LCD for checking the ADF performance.
This function is applicable to the models with ADF.
Operating Procedure
(1) Set documents. (Allowable up to the ADF capacity.)
The "ADF READY" appears on the LCD.
(2) Press 0 and 8 keys in this order in the initial stage of the maintenance mode. For models
without numerical keypad, enter 0 and 8 in this order using the
The machine feeds the documents in and out while counting them and displaying the
current count on the LCD as shown below.
(3) After counting all documents, the machine shows the final count. To return the machine to
the initial stage of the maintenance mode, press the Stop/Exit key.
ADF CHK P.01
Current count (1st page in this example)
9-8
, and OK keys.
Confidential