Brother DCP375CW Service Manual page 416

*10
HP_LOG1:
*11
COMERR1:
CLID0:
CLID1:
CLID2:
CLID3:
DCLPN:
BACKUP VER:
*12
RESET COUNT
After all of the log information items above are displayed, pressing the Black Start (Mono
Start) key returns the screen to the calendar clock in step (1) above.
(3) To stop this operation and return the machine to the initial stage of the maintenance mode,
press the Stop/Exit key.
In the following notes, the OK key is used. For models having no OK key on the control panel,
use the Photo Capture key instead of the OK key.
*1 DCPJ140W "S/N:" appears instead of "USB:."
With the S/N being displayed, pressing the OK key toggles between the following two
indications.
S/N:
**************
Machine serial number change procedure
The serial number of the machine can be changed with the following procedure.
Models with numerical keypad:
1) With the serial number being displayed, press the OK key and then press the 9, 4, 7 and 5
keys in this order.
The uppermost digit of the current serial number flashes.
2) Enter the uppermost digit of the desired serial number with numerical keys, then press
the key to move the cursor to the next lower digit. In the same way, enter the
remaining 14 digits.
Home positioning detection log data (Byte 0 to 3 of 16 bytes)
Communications error history
Base ID code
(Shown on models with a cordless handset)
ID code of cordless handset 1
(Shown on models with a cordless handset)
ID code of cordless handset 2
(Shown on models with a cordless handset)
ID code of cordless handset 3
(Shown on models with a cordless handset)
PIN code of cordless handset
(Shown on European models with a cordless handset)
Backup data file version of machine information (Function code 46)
Reset count
Serial number information
Serial number of the machine
9-64
Only for DCPJ140W
Confidential