10 ] Adjustments/Data In The Memories - Brother DCP375CW Service Manual

[ 10 ] Adjustments/data in the memories

Adjustment/data
setting error in the
following
components:
EEPROM customizing
code
ID code
Head property data (in
the EEPROM)
Correction of head
positioning error
Updating of the paper
feeding correction
value for the paper feed
roller/paper ejection
roller (Function code
58)
Setting of the CIS
scanner area
Alignment of vertical
print lines
Result
- The machine will not work as specified
for that model or that shipping
destination.
- The machine will not be able to be
identified by the PC connected to it via
USB.
- The print quality will deteriorate.
- Any of the following images may appear
on the printout:
- Any of the following images may appear
on the printout:
- The white and black level data will not
be compensated properly.
- The scanning center position will not be
centered.
- The enlargement/reduction ratio of
copies will go wrong.
- The following image may appear on the
printout:
4-54
Refer to:
- Chapter 9, Section
9.4.24
- Appendix 3
- Chapter 7, Section
7.3, [ 8 ]
- Chapter 7, Section
7.2, [ 1 ]
- Chapter 9, Section
9.4.22
- Chapter 7, Section
7.2, [ 4 ]
- Chapter 7, Section
7.2, [ 5 ]
- Chapter 9, Section
9.4.16
- Chapter 9, Section
9.4.15
- Chapter 7, Section
7.2, [ 6 ]
- Chapter 9, Section
9.4.20
Confidential
Error
codes