Brother DCP375CW Service Manual page 244

Assembling Notes: When mounting the MJ/PS shield unit onto the lower cover, route the
power supply harness through the U-shaped cutout (shown on the previous page) provided
in the lower MJ/PS shield.
After mounting the MJ/PS shield unit, route the power supply harness through the channel
and route the main-MJ (EXT) harness
the lower cover as shown below.
Main-MJ (LINE) harness (yellow)
Carriage motor
harness
*1
SDAA enclosure 1
*
1
*
6-51
and main-MJ (LINE) harness
Main-MJ (EXT) harness (black)
ASF motor harness
Paper feed motor harness
Hook switch harness
Power supply harness
Channel
*1
on the left side of
*1 For MFC only
*2 For models with handset
1
*
2
*
PF encoder/registration
sensor harness
Main PCB
(6_52)
Confidential