Brother DCP375CW Service Manual page 417

Entry of alphabet letters
To enter an alphabet letter, press the corresponding numerical key repeatedly until the
target alphabet letter appears.
Numerical keys
2
3
4
5
6
7
8
9
3) Upon completion of entry of all digits, press the OK key.
The machine saves the newly entered setting and returns to the initial stage of the
maintenance mode.
To cancel the entry of a serial number halfway through the above procedure, press the
Stop/Exit key. The machine returns to the initial stage of the maintenance mode.
Models without numerical keypad:
1) With the serial number being displayed, press the OK key and then enter 9, 4, 7 and 5
using the /
The cursor appears at the uppermost digit of the current serial number.
2) Use the /
press the OK key.
3) Use the key to display the
cursor to the next lower digit.
Use the /
press the OK key. In the same way, enter the 3rd to 15th digits of the desired serial
number.
4) Upon completion of entry of all digits, press the OK key.
The machine saves the newly entered setting and returns to the initial stage of the
maintenance mode.
To cancel the entry of a serial number halfway through the above procedure, press the
Stop/Exit key. The machine returns to the initial stage of the maintenance mode.
*2 For DCPJ140W "CISF:" appears instead of "CIS:."
*3 With the PictBridge information being displayed, pressing the OK key cycles through the
following items.
PICTBRIDGE:
BROTHER
***-*****
**/**
BR0000**
Letters supported
2 → A → B → C
3 → D → E → F
4 → G → H → I
5 → J → K → L
6 → M → N → O
7 → P → Q → R → S
8 → T → U → V
9 → W → X → Y → Z
and OK keys.
keys to display the uppermost digit of the desired serial number, then
key on the LCD, then press the OK key to move the
keys to display the corresponding digit of the desired serial number, then
PictBridge information
Vendor name
Model name
Profile version/DPS version (not required for servicing)
PictBridge serial number (not required for servicing)
9-65
Confidential