Brother DCP375CW Service Manual page 209

ADF reinforcement plate
(3) Remove the screw, slightly lift up the front end of the ADF reinforcement plate, slightly
slide the plate to the front, and turn it upright.
Document reinforcement plate
Cutout
Slit
Document stopper
(4) Turn the ADF & document cover ASSY right side up.
(5) Remove the document stopper.
(6) Open the ADF cover.
(7) Lightly pull up the rear end of the document cover support with the tip of a flat screwdriver
and remove the support in the direction of the arrow shown below.
Document cover support
Document cover
Taptite, cup B
M3x12
(Rear)
6-16
ADF & document
cover ASSY
(6_19)
Confidential