Display Of The Equipment's Log (Function Code 80) (User-Accessible) - Brother DCP375CW Service Manual

Injet dcp/mfc
Hide thumbs Also See for DCP375CW:
Table of Contents

Advertisement

9.4.29 Display of the Equipment's Log (Function code 80) (User-accessible)

Function
The machine can display its log information on the LCD.
This procedure allows you to reset the purge count. It is necessary to reset the purge count when
the ink absorber box is replaced with a new one without replacing the main PCB.
Operating Procedure
(1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode. For models
without numerical keypad, enter 8 and 0 in this order using the
The calendar clock appears on the LCD.
(2) Press the Black Start (Mono Start) key to call up the following log information items on
the LCD, one by one.
NOTE: Some information items do not appear or the display sequence differs slightly
depending upon models.
TIP: Items in the shaded fields in the table below
When one of the log items in the shaded fields is displayed, pressing the 2, 7, 8, and 3 keys
in this order resets the displayed log information to zero.
00:00 00:00 OK
8CA***
COUNTRY:
SWITCH:
MAIN:
********
P****
B****
CLBS IH:
CLBS FW:
CLBS CP:
*1
USB:
ALR****
*2
CIS:
ENGINE:
PICTBRIDGE:
*4
DOT K:
*4
SEN K:
*4
PLA K:
RTC backup check (not required for servicing)
(Not shown on DCP)
Model code
Country code (See
Checksum of WSW, PSW, USW, and FSW (not required for servicing)
Version and production date of main firmware
Checksum of main firmware
Version and production date of sub firmware
Version and production date of boot firmware
Version of cordless handset's internal host (not required for servicing)
(Shown only on models with a cordless handset)
Version of cordless handset firmware
(Shown only on models with a cordless handset)
Version of cordless handset's communications package (not required
for servicing)
(Shown only on models with a cordless handset)
Serial number of the machine
Head property code
CIS type (Function code 59)
Engine type (not required for servicing)
*3
PictBridge information
(Shown only on models supporting PictBridge/USB flash memory
drive)
Ink drop count, indicating how many droplets have been jetted out from
each of the ink cartridges (including droplets used for purging)
Ink drop count after ink near-empty, indicating how many droplets have
been jetted out from each of the ink cartridges after the ink empty
sensor detects near-empty
Ink drop count, indicating how many droplets have been jetted out onto
the platen in borderless printing
Appendix
3.)
9-62
,
and OK keys.
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents