Brother DCP375CW Service Manual page 242

DCPJ125/J315W/J515W/J140W and MFCJ220/J265W/J270W/J410/J410W/J415W
(Only for DCPJ125/MFCJ220)
Main-MJ (EXT) harness
*
Carriage motor harness
Main-MJ (LINE) harness
*
ASF motor harness
Paper feed motor harness
PF encoder/registration
sensor harness
Power supply harness
Assembling Note: If you replace the main PCB, you need to load programs onto the flash
ROM, restore the machine information that has been backed up in an external memory
(refer to Chapter 9, Section
(refer to Chapter 7, Section
mounted.
SDAA enclosure
*
"e"
"e"
"e"
"d"
"c"
"c"
9.4.11), and make specified adjustments of various settings
7.3). Make sure beforehand that the head/carriage unit is
Main PCB
Main PCB shield frame
Lower cover
"c": Taptite, cup B M3x10
"d": Screw, pan (s/p washer) M3x8
"e": Taptite, cup S M3x6
6-49
* For MFC only
ASF encoder harness
Cap lift cam switch harness
Purge cam switch harness
Ink cartridge detection
sensor harness
Ink empty sensor
harness
(6_47_mini9e2_r1)
Confidential