7 ] Adjust Margins In Borderless Printing (Function Code 66) - Brother DCP375CW Service Manual

[ 7 ] Adjust margins in borderless printing (Function code 66)

Before starting the operation below, be sure to set letter-size paper in the paper tray for
printing check patterns.
(1) On the PC, run "filedg32.exe" in the folder created in
The Filedrgs window appears as shown below.
(2) Drag and drop the "media_bottomadj_a4.prn" onto the Brother Maintenance USB Printer
driver icon in the Filedrgs window shown above.
The machine displays the "RECEIVING DATA" on the LCD and prints out the "MEDIA
& BOTTOM CHECK" pattern (see
the left, right, and bottom margins.
Left and right margin adjustment
(3) Measure the left and right margins on the printed pattern.
The upper row is printed in 600 dpi, and the lower row, in 1200 dpi.
(Example) 600 dpi
If both of the left and right margins are within the range from 0.9 to 1.1 mm, no adjustment
is required. If not, go to step (4).
(4) If either of the left and right margins is out of the specified range, press the 6 key twice and
the * key on the machine. (For models without numerical keypad, enter 6, 6, and * using
the , and OK keys.)
The "LEFT: 10" appears on the LCD.
Left: 0.8 mm, Right: 1.1 mm
1200 dpi Left: 0.9 mm, Right: 1.2 mm
Section
page 7-27 for a sample printout). This is for checking
7-24
7.1.1.
Confidential