Placement Of Cis Unit In Position For Transportation (Function Code 06); Adf Performance Test (Function Code 08) - Brother MFC-9130CW Service Manual

1.4.3

Placement of CIS unit in position for transportation (Function code 06)

<Function>
This function is to move the CIS unit of the document scanner unit in position for transportation
located at the left end. When you fix the machine and check its operation, you need to
perform this function last before packing and shipping.
(This function does not apply to the CIS unit of the ADF unit.)
Note:
Please instruct end users to perform this function if possible before packing and shipping
their machine to a sales agent or a service dealer for the purpose of repair. (For information
on the procedure to make the user operate the maintenance mode, refer to
"1.2 How to Enter the End User-accessible Maintenance Mode" in this
<Operating procedure>
(1) Press the 0 and 6 keys in this order in the initial state of the maintenance mode.
"Maintenance 06" appears on the LCD and the CIS unit starts to be moved.
(2) When the movement of the CIS unit is completed, "SCAN LOCKED" is displayed on the
LCD.
(3) Press the Stop key to return the machine to the initial state of the maintenance mode.
Note:
When the document scanner unit fails to move to the transport position or when this
function code is executed while a reading error occurs, an error occurs and "SCAN
LOCK ERROR" is displayed on the LCD.
1.4.4

ADF performance test (Function code 08)

<Function>
This function is to test the performance of the automatic document feeder (ADF).
The machine counts the number of scanned pages of the documents fed from the ADF and
displays the result on the LCD.
<Operating procedure>
(1) Load documents on the ADF unit. "DOC.READY" is displayed on the LCD.
(2) Press the 0 and 8 keys in this order in the initial state of the maintenance mode.
The machine displays "ADF CHECK P.**" on the LCD and ejects documents while
counting the number of scanned pages. (** indicates the current count of scanned pages.)
Memo:
For duplex scanning models, as 2 faces are scanned per a sheet of document, the
page count increases by two each time a sheet of document is ejected.
(3) Press the Stop key to return the machine to the initial state of the maintenance mode.
Note:
- If the ADF cover is opened, the machine displays "NO DOCUMENT" on the LCD and
returns to the ready state in the maintenance mode.
- If no documents are loaded in the ADF, the machine displays "NO DOCUMENT" on
the LCD and returns to the ready state in the maintenance mode.
5-11
chapter.)
Confidential