Service Manual TD70
Service and installation
Replacing the panel and the control unit
Instructions
1. Attach the anti-static wristband
to a part of the machine that is
earthed!
NOTE! An anti-static wristband
must be used, otherwise you risk
destroying the control card.
2. Unscrew the top cover.
2. Carefully press the catches
that secure the panel to the front
support. Release the catches from
the front support by working the
panel outwards.
3. Detach the panel by angling and
pulling it carefully outwards at the
lower edge.
Note: Be careful not to damage the
wiring!
4. Carefully disconnect the wiring
from the control unit.
Illustration
41