Loading Or Removing Laundry - Asko TLS752 XXL Operating Instructions Manual

Operating Instructions
6
Press the Start button
Remaining drying time
The remaining drying time will be
shown on the display. For example, 1:35
means it will take approximately 1 hour and
35 minutes for the load to dry. If the Anti-
crease option has been selected, the drum
will rotate until you press the Power button
or Start/Stop button.
Note!
• The program will not be affected if you
change the program selector after the
program has started.
• The program will continue from where
the program was interrupted if you close
the door and press the Start button
within 10 minutes. If the program is
interrupted for more than 10 minutes,
the dryer will be shut off. Select new
program settings before restarting the
dryer.

Loading or removing laundry

If you want to load or remove laundry once
you have started the machine, open the
door and the program will stop. Add more
laundry or take out the items you want,
close the door, and press the Start/Stop
button
7
Dry program finished
The text "END" appears on the
display when the program has ended.
If the Anti-crease option has been selected,
the drum will periodically rotate until you
press Power button or Start/Stop button.
Note!
Clean the lint filter after each load.
Caution!
If the lint filter becomes clogged, the
machine's automatic overheating cut-off
may be triggered.
Cleaning the lint filter
1. Open the door and pull the filter straight
up.
2. The filter may need to be cleaned if it
has lime-scale deposits. See the "Care
and maintenance" chapter.
8
Once drying has finished
Turn off the power switch. Remove
the clothes and close the door to
prevent small children from climbing into the
machine
Customer Care Center
1-800-898-1879
www.askousa.com
17