Macintosh Clients - Advantech UniGateway EH-2101W User Manual

Macintosh Clients

From your Macintosh, you can access the Internet via the UniGateway EH-2101W. The
procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field
can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes are:
•
Set the Router Address field to the UniGateway EH-2101W's IP Address.
•
Ensure your DNS settings are correct.
Printing
If you wish to share the printer connected to the UniGateway EH-2101W, using a LaserWriter
or compatible is required.
Installing the Printer
To gain access to the printer connected to the UniGateway EH-2101W, follow this procedure:
1. Select Control Panel - Network.
2. Ensure that EtherTalk is selected under AppleTalk Connection.
3. Open Chooser, and select the correct printer type (e.g. LaserWriter).
4. From the list of available printers on the right, select the UniGateway EH-2101W, then
click Create.
5. The new printer will be created, and can be used like any other printer.
PC Configuration
35