UniGateway EH-2101W User Manual
Password Screen
The password screen allows you to assign a password to the UniGateway EH-2101W.
Once you have assigned a password to the UniGateway EH-2101W (on the Password screen
above) you will be prompted for the password when you connect, as shown below. (If no
password has been set, this dialog will not appear.)
•
Leave the "User Name" blank.
•
Enter the password for the UniGateway EH-2101W, as set on the Password screen above.
table (all entries identical).
128 Bit Encryption
•
If selected, data is encrypted using the key before being transmit-
ted. The receiving station must be set to use 128 Bit Encryption,
and have the same Key value. Otherwise, it will not be able to de-
crypt the data.
•
Key - Enter the key value you wish to use. Other stations must
have the same key.
Figure 8: Password Screen
Figure 9: Password Dialog
20