Using Dhcp - Advantech UniGateway EH-2101W User Manual

Checking TCP/IP Settings - Windows 9x/ME
1. Select Control Panel - Network. You should see a screen like the following:
Figure 10: Network Configuration
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
Figure 11: IP Address (Win 95)
4. Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the UniGateway EH-2101W.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the
following changes.
22