Connection Log - Advantech UniGateway EH-2101W User Manual

User
Phone Line Speed
Serial Line Speed

Connection Log

Connection Log
Connection Log
This shows the commands sent to the modem, and any status messages returned by the modem.
Note that you must click Refresh to update the information.
The following table lists the common messages, and their meaning.
Message
Dialing
Try to establish
physical connection.
Busy
Physical line is
connected
CONNECT nnnnnn
Max phone line speed
nnnnnn bps
DCD low,
DSR low
send "-----"
wait "-----"
Start PPP
PPP up fail
PPP up successfully
Stop PPP
UniGateway EH-2101W.
There are 2 possibilities:
•
For Internet Access, this shows the Internet Account name.
•
For Dial-in operations, this shows the current user.
The connection speed over the phone line, between your modem
and the number dialed, as reported by your modem.
The connection speed between this device and the modem. This
setting can be changed on the Dial-in screen.
This displays connection details.
See below for a description of the most common items in this log.
Description
Dialing the ISP
The device is trying to connect with the ISP, using the modem.
The number dialed was busy.
Physical connection to ISP has been established.
Physical connection was successful; nnnnnn indicates the speed of
the serial link as currently configured.
nnnnnn is the maximum speed of the modem, according to the
current configuration.
Physical line break, connection lost.
"AT" commands sent to the modem are displayed as they are sent.
Commands in the Script file are also displayed as they are exe-
cuted.
Having established a physical connection, a PPP connection is now
being established.
The PPP connection could not be established.
The PPP connection was established successfully.
The PPP connection was terminated. This will occur at the end of a
session, or an error condition.
48